Skip to content
  • Sir William Arrol Collection
  • Scottish Explosives Collection

Kinetics Industrial Museum

Category: Uncategorized

Read Post ›

Mathieson Crosscut Saw

This large crosscut saw was made by Alex Mathieson & Son at their Saracen Foundry – it could be used by one or two people.

Read Post ›

Samson Coalcutter Plate

This plate was once attached to a Glasgow-made Mavor & Coulson coal-cutting machine, but later someone made it into a Cribbage board!

Read Post ›

Model Yarrow Boiler

A model Yarrow boiler, as fitted to hundreds of Clydebuilt ships.

Read Post ›

Steam Turbine Low Pressure Blade

A spare unused low pressure turbine blade from the 600MW steam turbine at Hunterston nuclear power station. There are two of these in the museum, one with the original packing grease, one cleaned up. Many, many thanks to Alan Rich and EDF for this donation!

Read Post ›

North Sea Oil Miniature

A 1975 promotional miniature whisky bottle of North Sea oil, from Marinco Marine Industrial Cleaning Ltd.

Read Post ›

Boilermakers Certificate

A membership certificate from The United Society of Boiler Makers and Iron & Steel Ship Builders.

Read Post ›

Babcock & Wilcox Crane Plates

The makers’ plates from an overhead gantry crane made by Babcock & Wilcox at Dalmuir – this crane was installed at B&W’s own works at Renfrew.

Read Post ›

Morgan Folding Seat

A little spring-loaded folding seat made in Glasgow. This kind of seat was often used by elevator operators.

Read Post ›

Tricone Drilling Head

A rock drilling head from a North Sea oil rig. The three hardened steel cones have hard teeth that chew up the rock, and it is then flushed away by water pumped through the head.

Read Post ›

Nuclear Weapon Effects Computers

A couple of circular slide rule calculators, used to work out the damage, casualties and exposure effects from nuclear weapons. Dating from the 1960s, these were probably used by the Royal Observer Corps.

Read Post ›

Busbar Section

A section of electrical conductor (“busbar”) from inside a 650MW steam turbine from a power station. Earlier conductors were solid copper, these more sophisticated ones are water-cooled through those little channels. The conductors were also cleverly arranged so they were all the same length as the buster went around corners. Many thanks to Alan Rich […]

Posts navigation

← Older posts
Newer posts →

Opening Hours:
When Kinetics is open - 9-5, Tuesday to Saturday

Address:
Kinetics, 826 Garscube Road, Glasgow G20 7ET, Scotland

Contact:
museum@kinetics-online.co.uk

Transient Places - Urban Exploration Photography
Proudly powered by WordPress | Theme: Museum by Kelly Dwan & Mel Choyce.